CT-1500.5D // 1800 Watts RMS 5-Channel Car Audio Amplifier
CT SoundsCT Sounds
3.0

CT-1500.5D // 1800 Watts RMS 5-Channel Car Audio Amplifier

USD 269.99

Description

The CT Sounds CT-1500.5D is an 1800-watt 5-channel amplifier designed for those who demand power, efficiency, and affordability. This compact yet robust amplifier can drive an entire car audio system—4 speakers and a subwoofer—all from a single unit, making it the perfect all-in-one solution. Quick Facts: RMS Power: 1Ω @ 14.4v CH5: 1000W x 1-Ch RMS Power: 2Ω @ 14.4v CH1-4: 210W x 4-ChCH5: 600W x 1-Ch RMS Power: 4Ω @ 14.4v CH1-4: 120W x 4-ChCH5: 300W x 1-Ch Designed for precision tuning, the amplifier features a Low Pass Filter (LPF), High Pass Filter (HPF), and Bass Boost, allowing you to fine-tune your sound to your exact preferences. The MOSFET power supply and proprietary heat dissipation design keep the amplifier running cool, ensuring sustained performance even during extended use. The compact chassis and small footprint make installation straightforward, fitting seamlessly into almost any vehicle. Built-in protection circuitry safeguards against high voltage, low voltage, over current, and excessive temperatures, providing long-term reliability and peace of mind. FEATURES Features: Continuously-Variable Input Gain Control ✔️ Remote Turn-On / Turn-Off Circuit ✔️ MOSFET Pulse Width Modulated Power Supply ✔️ Soft Turn-On Circuit ✔️ High Voltage / Low Voltage Protection Circuit ✔️ Thermal and Speaker Short Protection Circuit ✔️ LED Power and Protection Indicators ✔️ SPECS Technical Specifications: Amplifier Type: 5-Channel Amplifier Amplifier Circuitry: Class D Built-In Crossover? CH1-4: Yes; HPF, Full-Range CH5: Yes, LPF Bridgeable? Yes RMS Power @ 1 Ohm: CH5: 1000Wx 1-Ch (14.4v) RMS Power @ 2 Ohm: CH1-4: 210W x 4-Ch (14.4v) CH5: 600W x 1-Ch (14.4v) RMS Power @ 4 Ohm: CH1-4: 120W x 4-Ch (14.4v) CH5: 300W x 1-Ch (14.4v) RMS Power @ 4 Ohm (Bridged): CH1-4: 350W x 2-Ch (14.4v) Recommended Fuse: 180A Power & Ground Input Size: 4 Gauge Speaker Input Size: 8 Gauge Gain Adjustment: 0.22v - 6v Low Pass Filter (LPF): CH1-4: N/A CH5: 50 Hz - 250 Hz High Pass Filter (HPF): CH1-4: 40 Hz - 4 kHz CH5: N/A Bass Boost: CH1-4: N/A CH5: 0 dB - 12dB Bass Boost Frequency: 45 Hz Frequency Response: 20 Hz - 20 kHz Signal-To-Noise Ratio (S/N): 94 dB Damping Factor: 180 Input Impedance: 22 Kohms Input Sensitivity: 220 mV Operating Voltage: 8.6v - 16v Minimum Impedance: 1 ohm Dimensions: Length: 13.2" Width: 5.63" Height: 2.19"

CT Sounds deal

You could save on CT Sounds CT-1500.5D // 1800 Watts RMS 5-Channel Car Audio Amplifier with a CT Sounds promo code:

    CT Sounds logo

    10% off

    28 uses
    high

    worked about 1 month ago

    10% Off Storewide at CT Sounds
View all CT Sounds coupons and promo codes

More CT Sounds Products

TROPO-2X8D4 // Dual 8” 1600-Watt Loaded Tropo Series Ported Car Subwoofer Box

TROPO-2X8D4 // Dual 8” 1600-Watt Loaded Tropo Series Ported Car Subwoofer Box

The CT Sounds TROPO-2X8D4 is a pre-loaded dual 8” ported car subwoofer box that takes the guesswork out of finding the perfect subwoofers and enclosure for your system. The bass package features two of our TROPO-8-D4 800-watt max power 8-inch car subwoofers which come pre-installed flush into the 1.25” front baffle using claw nuts and fasteners ensuring an air-tight seal. Additionally, the dual 4-ohm subwoofers are pre-wired inside the enclosure using 12 gauge ofc wire for a 1-ohm final impedance at the terminal cup. This is a true plug-n-play offering - simply run a +/- wire from the terminal cup to the +/- speaker terminals of your amplifier. The unique high-performance kerf-port, typically only seen in custom enclosures, allows the air pressure to exit smoothly and quickly creating extreme levels of responsive bass output. Furthermore, from the top to the bottom of the interior port walls is a 3-mm rabbet-groove that runs 80-mm into the port on the left/right interior port walls - this allows the premium black carpet to lay flush inside the port with zero-edge providing a smooth exit for the air and eliminating port-noise. Lastly, the enclosure was constructed using advanced joinery practices - dado joints connect the exterior left, right, top, bottom, and back wood pieces, and miter joints connect the corners of the box by cutting the wood at a 45-degree angle. These joinery practices ensure maximum surface contact and eliminate vibration. From the second you open the package, to the moment you pull the loaded enclosure out of the thick cardboard box, you will immediately recognize the craftsmanship and details that went into not just the secure packaging but the overall design of this product. Specs General Specifications: Subwoofer Box Size: 8" Number of Subwoofer(s): 2 Subwoofers Included Subwoofer(s): TROPO-8-D4 Subwoofer Box Type: Loaded Subwoofer Box Subwoofer Box Style: Kerf Port Front Baffle Thickness: 1.25" Wood Material: MDF RMS Power: 800 Watts MAX Power: 1600 Watts Final Impedance Load: 1 Ohm Terminal Cup Size: 8 Gauge Internal Speaker Wire Size: 12 Gauge Internal Speaker Wire Type: OFC Subwoofer Box Specifications: Cut-out Diameter: 7.30" Mounting Depth: 11.16" Total Volume: 1.73 ft3 Tuning Frequency: 39 Hz Port Width: 2.52" Kerf Fold Length: 3.93" Kerf Fold Width: 2.50" Dimensions External Dimensions: Length: 24.75" Height: 11.00" Depth (Bottom): 17.76" Depth (Top): 15.82"

USD 239.99

MESO-6-5-COM // Meso 6.5 Inch 320 Watt 2-Way Component Speaker Set

MESO-6-5-COM // Meso 6.5 Inch 320 Watt 2-Way Component Speaker Set

It’s no surprise the CT Sounds Meso components have been a best-selling product of CT Sounds for years. The Meso 6.5” 2-way component speakers are custom engineered to bring you the highest tonal accuracy by providing a well-balanced experience of rich tones from powerful mid-bass to snappy highs. The 6.5 inch component woofer features a fiberglass cone and nitrile butadiene rubber surround which allows the 6.5 component speaker to deliver top notch sound quality and mid-bass to your vehicle. To finish the equation, the 1 inch silk dome tweeters are included to effectively deal with high frequencies. The voice coil is suspended in ferrofluid with a N38H motor assembly to provide an accurate reproduction of your favorite tracks.If you want to play your music loud enough for the entire neighborhood to hear, then look no further than the Meso 6.5” 2-Way Component Speaker Set. Quick Facts: RMS Power: 160 Watts (Pair) MAX Power: 320 Watts (Pair) Speaker Type: 6.5" 2-Way Component Voice Coil Configuration: Single 4-Ohm 6.5” 2-Way Car Component Speaker Set Power per speaker set: 80W RMS | 160W MAX Total system power: 160W RMS | 320W MAX Voice Coil Configuration: Single 4-Ohm 1.4” EISV Voice Coil Fiberglass Cone Nitrile Butadiene Rubber Surround Aluminum Basket 25mm Silk-Dome Tweeter 2-Way Component Speaker Set Includes: (2) 6.5” Midrange Woofers (2) 25mm Silk-Dome Tweeters (2) 12 dB Passive Crossover Networks Screws and Mounting Brackets Premium Wire For Easy Installation Speaker Grilles for 6.5” Midrange Woofers Woofer Specifications: Voice Coil Size: 1.4" Sweep Voltage: 12 V Output SPL (@1w/1m): 89 dB Resonant Frequency: 65 Hz Frequency Response: 40 Hz - 20 kHz Magnet Weight: 21 Oz Magnet Type: Ferrite Tweeter Specifications: Sweep Voltage: 2.8 V Output SPL (@1w/1m): 90 dB Frequency Response: 1500 Hz ~ 20 kHz Tweeter Size: 25mm Tweeter Type: Silk-dome Magnet Type: Neo Crossover Specifications: Crossover Circuit: 5.6 μF capacitor / 100 V Filter for Woofer: 12 dB Filter for Tweeter: 12 dB Mounting Info Mounting Specifications: Overall Diameter: 6.75" Cutout Diameter: 5.70" Magnet Diameter: 4.17" Magnet Height: 1.22" Mounting Depth: 2.87" Overall Height: 3.10"

USD 189.99

CT-150.4D // 1000 Watts RMS 4-Channel Car Audio Amplifier

CT-150.4D // 1000 Watts RMS 4-Channel Car Audio Amplifier

CT Sounds engineered the CT-150.4D Full-Range Class D Multichannel Car Amplifier for anyone in need of a powerhouse amplifier that fits just about anywhere in your vehicle and won’t destroy your wallet. If you want to do 100 mph down the highway with the windows down and still have crisp and clear sound over the wind noise then look no further. This multi-channel amplifier features a Low Pass Filter (LPF) and Subsonic Filter so you can get the exact sound you are looking for out of your amplifier. The MOSFET power supply and proprietary heat dissipation design will ensure that the amplifier runs cool for even the most demanding playlists. Furthermore, the compact chassis and small footprint make it easy to install in any car audio application.  You can sleep easy at night knowing your amplifier is protected from damage due to the amplifiers uniquely engineered protection circuitry featuring high voltage, low voltage, over current, and high-temperature protection. Quick Facts: RMS Power: 2Ω @ 14.4v 250 Watts x 4-Channels RMS Power: 4Ω @ 14.4v 150 Watts x 4-Channels RMS Power: 4Ω @ 14.4v 475 Watts x 2-Channels Bridged Power & Ground Input Size: 4 Gauge Speaker Input Size: 12 Gauge FEATURES Features: Continuously-Variable Input Gain Control ✔️ Remote Turn-On / Turn-Off Circuit ✔️ MOSFET Pulse Width Modulated Power Supply ✔️ Soft Turn-On Circuit ✔️ High Voltage / Low Voltage Protection Circuit ✔️ Thermal and Speaker Short Protection Circuit ✔️ LED Power and Protection Indicators ✔️ SPECS Technical Specifications: Amplifier Type: 4-Channel Amplifier Amplifier Circuitry: Class D Built-In Crossover? Yes; HPF, Full-Range, LPF Bridgeable? Yes RMS Power @ 2 Ohm: 250 Watts x 4-Ch (14.4v) RMS Power @ 4 Ohm: 150 Watts x 4-Ch (14.4v) RMS Power @ 4 Ohm (Bridged): 475 Watts x 2-Ch (14.4v) Recommended Fuse: 120A Power & Ground Input Size: 4 Gauge Speaker Input Size: 12 Gauge Gain Adjustment: 0.35v - 10v Low Pass Filter (LPF): 50 Hz - 500 Hz High Pass Filter (HPF): 50 Hz - 500 Hz Bass Boost: 0 dB - 12 dB Bass Boost Frequency: 45 Hz Frequency Response: 20 Hz - 20 kHz Signal-To-Noise Ratio (S/N): 96 dB Damping Factor: 170 Input Impedance: 22 Kohms Input Sensitivity: 350 mV Operating Voltage: 8.8v - 15.3v Minimum Impedance: 2 ohm Dimensions: Length: 10.15" Width: 5.63" Height: 2.19"

USD 199.99

NEO65-4 // 250 Watts RMS 6.5” Midrange Speaker

NEO65-4 // 250 Watts RMS 6.5” Midrange Speaker

CT Sounds engineered the NEO65-4 pro audio speaker to be the loudest midrange speaker we have ever released in company history! This speaker was almost not released due to liability concerns… We are not responsible for hearing loss. The neo pro audio speaker features a N42 Neo Magnet which plays a huge role in the sensitivity (loudness) of the speaker. While most manufacturers cheap out and go with a N35 (most common) we spared no cost utilizing the highest grade neo magnet available, the N42. Furthermore, the loudspeaker utilizes a CCAW voice coil (more expensive than copper voice coil) which allows this speaker to perform exceptionally well at middle to high frequencies compared to the competition. If you like your music LOUD, look no further than the CT Sounds NEO65-4 midrange speaker. We warned you… Speaker Size: 6.5" Loudspeaker RMS Power (per speaker): 250W RMS MAX Power (per speaker): 500W MAX Voice Coil Configuration: Single 4 Ohm Voice Coil Size: 1.51" Voice Coil Winding Material: CCAW Voice Coil Former Material: Kapton Magnet Weight: 4 Oz Magnet Material: Neo Sensitivity: 97 dB Frequency Response: 150 Hz - 10,000 Hz Mounting Info Mounting Specifications: Overall Height: 2.75" Overall Diameter: 6.69" Cutout Diameter: 5.65" Magnet Height: 0.88" Magnet Width: 3.09"

USD 49.99

You May Also Like